SMA 306 Classroom





To Use Desktop Computer with LCD Projector
  • To display computer image on projector, use the Control Panel on top of instructor station. (Pictured above). 
  • Press and hold Display On button for two seconds. Button will blink, indicating that the projector is turning on.
  • Press PC button on input selector of control panel.
  • The computer image should appear on screen.
  • Adjust volume, if needed, with volume knob on control panel.
  • To temporarily mute the image, press the PIC MUTE button on the control panel.
  • When finished, log off computer, then press the Display Off button, holding it at least 2 seconds until it starts blinking.


To Use Laptop with Projector
  • There are two laptop cables on the instuctor's console. If your laptop has a VGA port, use the VGA cable to plug into your laptop.  If needed, connect the audio cable to the headphones jack on your laptop.  If your laptop has an HDMI port, use the HDMI cable to plug into your laptop.
  • Turn on laptop.
  • To display laptop image on projector, use the Control Panel on top of instructor station. (Pictured above)
  • Press and hold Display On button for two seconds. Button will blink, indicating that the projector is turning on.
  • Press the VGA or HDMI buttons, depending on your choice of cable, on the control panel input selector.
  • Laptop image should appear on screen. If image is not optimal, press the Auto Image button on the control panel.
  • If needed, adjust volume with knob on Control Panel.
  • To temporarily mute the image, press the PIC MUTE button on the control panel.
  • When finished, turn off and unplug laptop, then press the Display Off button, holding it at least 2 seconds until it starts blinking. Projector will then turn off.

To Show A BluRay or standard DVD
  • Turn on BluRay player, located inside the equipment rack. Insert DVD.
  • To display DVD image on projector, use Control Panel on top of instructor station. (Pictured above)
  • Press and hold Display On button for two seconds. Button will blink, indicating that the projector is turning on.
  • Press the BluRay button on Control Panel input selector.
  • Insert DVD in the DVD drive.
  • Operate DVD player with buttons on the top control panel.
  • Adjust volume using knob on Control Panel.
  • When finished, press the Display OFF button, holding it at least 2 seconds until it starts blinking. Eject DVD and turn off DVD player.

To Use Apple TV
  • At the lectern, there is an Extron touch panel.  Press and hold (for 2 seconds) the Display ON button.
  • Please wait while the projector starts up.
  • In the middle of the Extron touch panel screen (pictured above), there are source icons.  Push the "Apple TV" icon.
  • Apple TV provides the ability to wirelessly project the contents of your iPhone, iPad, or MacBook to the projector.
  • Your laptop or device must be connected to the "Kenyon Devices" wifi network in order to communicate with the Apple TV.
  • Once connected to "Kenyon Devices", select the AirPlay icon at the top of your laptop screen (looks like a rectangle with a black triangle) and then select "SMA 202 Apple TV."  For iOS devices, swipe up from the bottom of your screen to access the Control Center, and select the AirPlay icon.
  • (Instructions for doing this should have appeared on the projector screen once you select "Apple TV" on the touch panel.)
  • Your device's image should now appear on the projector screen
  • When finished, press the AirPlay icon to disconnect and turn off the projector by pressing the "Display Off" button at the top of the control panel. 

More Information
For immediate assistance with classroom presentation technology (M-F 8am-5pm), please call 1-740-427-5711 or, to set up a consultation or other classroom technology service request, place a classroom technology request on our TopDesk service portal.