To Use Desktop Computer with LCD Projector
- Turn on computer and log in. There is a wireless keyboard/trackpad available for control from any location in the room. (There is also a wired keyboard available.)
- On the control panel, Press the Display On button.
- Press PC button.
- Computer image should appear on screen.
- Adjust volume, if needed, with volume knob and volume icon on the computer's taskbar.
- If you need to temporarily darken the screen, press the PIC MUTE button.
- When finished, log off the computer, then press the Display Off button.
To Use Wireless Keyboard
- Remove wireless keyboard from the charging base.
- Ensure that On/Off switch on upper right side is set to On (orange dot will appear.)
- Place keyboard at desired location on the seminar table.
- To move the cursor, use your finger on the round trackpad on lower right of keyboard. (To Click, double tap on trackpad.)
- To scroll vertically, place your finger on the white dot on the trackpad, and then turn clockwise to scroll down and counterclockwise to scroll up.
- When finished, leave keyboard power on and return it to the charging base.
To Use Laptop with Projector
- There are two locations where one can plug in a laptop. There is a laptop cable in the cabinet under the computer and there is also one at the front of the room, near the desk.
- Plug laptop cable into laptop's external monitor jack, and connect the audio cable to the headphones jack on your laptop.
- Turn on laptop.
- To display laptop image on projector, use the Control Panel at the rear cabinet, next to monitor. (Pictured above)
- Press Display On button.
- Press Portable PC 1 or 2 button.
- Laptop image should appear on screen.
- Adjust volume with knob on Control Panel.
- When finished, turn off and unplug laptop, then press the Display Off button.
To Use Apple TV
- At the desk, there is an Extron touch panel. Press the Power icon (Above "Press Here to Begin.")
- Please wait while the projector starts up (45 seconds.)
- At the top of the Extron touch panel screen (pictured above), there are source icons. Push the "Apple TV" icon.
- Your laptop or device must be connected to the "Kenyon Devices" wifi network in order to communicate with the Apple TV.
- Once connected to "Kenyon Devices", select the AirPlay icon at the top of your laptop screen (looks like a rectangle with a black triangle) and then select "Hayes 109 Apple TV." For iOs devices, swipe up from the bottom of your screen to access the Control Center, and select the AirPlay icon.
- (Instructions for doing this should also appear on the projector screen once you select "Apple TV" on the touch panel.)
- Your device's image should now appear on the projector screen.
- When finished, press the AirPlay icon to disconnect and turn off the projector by pressing the "System Off" button at the bottom right of the touch panel.
- At the "Do you want to turn the system off" screen, select "Power Down."
To Show A DVD
- Turn on Blu-Ray player, located in the cabinet below the computer monitor, and insert DVD.
- To display DVD image on projector, use Control Panel on top of cabinet, next to computer monitor. (Pictured above)
- Press the Display On button.
- Press the DVD/Blu-Ray button on Control Panel.
- Operate DVD player with the provided remote control.
- Adjust volume using knob on Control Panel.
- When finished, press the Display OFF button. Eject DVD and turn off DVD player.
More Information
For immediate assistance with classroom presentation technology (M-F 8am-5pm), please call 1-740-427-5711 or, to set up a consultation or other classroom technology service request, place a classroom technology request on our TopDesk service portal.