To Use Laptop with LCD Projector
- Please provide your own laptop, if needed.
- Use provided HDMI cable with adapters and plug it into your laptop's display port.
- Press and hold the ON button located on the Extron Control Panel (pictured above) for two seconds.
- Press the LAPTOP button on the control panel.
- To adjust the audio, use the volume knobs located on the Extron Control Panel
- Turn off the projector when finished by pressing and holding the OFF button for two seconds or until the button begins to blink, indicating the projector has initiated shutdown.
To Show A Document on the Document Camera
- Press the ON button on the Samsung document camera, and place your document on the flat surface below the camera.
- Press and hold the ON button located on the Extron Control Panel (pictured above) for two seconds.
- To set the projector input to view the Samsung document camera, press the DOC CAM button on the input selector.
- Turn off the projector when finished by pressing and holding the OFF button for two seconds or until the button begins to blink, indicating the projector has initiated shutdown.
- Turn off the document camera and the projector when finished.
To Use Apple TV for Wireless Screencasting
- At the lectern, there is an Extron touch panel. Press and hold (for 2 seconds) the Display ON button and wait while the projector starts up.
- On the Extron touch panel (pictured above), there are source icons. Push the APPLE TV button.
- Apple TV provides the ability to wirelessly project the contents of your iPhone, iPad, or MacBook to the projector.
- Your laptop or device must be connected to the "Kenyon Devices" wifi network in order to communicate with the Apple TV.
- Once connected to "Kenyon Devices", select the AirPlay (or screen mirroring) icon on your device, and then select the Apple TV for the room in which you are presenting. (Instructions for doing this should have appeared on the projector screen once you select "Apple TV" on the touch panel.) It will display a code which you must input to your device.
- Your device's image should now appear on the projector screen.
- When finished, press the Mirroring/AirPlay icon on your device and turn it off. Turn off the projector by pressing the Display Off button at the top of the control panel.
To Use BLU-RAY/DVD with LCD Projector
- Turn on Extron Control Panel (pictured above) by pressing and holding ON for 2 seconds.
- Turn on Blu-ray control panel, located inside the equipment cabinet.
- Insert DVD or Blu-Ray disc.
- Switch the input display to BLURAY by pressing and holding that button on the projector control panel for 2 seconds.
- When finished, turn off Blu-Ray player. Turn off projector by pressing and holding OFF for two seconds.