Home »
Pierce L24-Chadeayne
To Use Laptop with NEC TV
- There is a laptop cable next to the Extron control panel. Plug laptop cable into laptop's external monitor jack, and connect the audio cable to the headphones jack on your laptop.
- Turn on laptop.
- To display laptop image on NEC TV, use the Control Panel on top of instructor station. (Pictured above)
- Press and hold Display On button for two seconds. Button will blink, indicating that the projector is slowly turning on.
- Press Laptop 1 button on control panel input selector.
- Laptop image should appear on TV screen.
- If needed, adjust volume with knob on Control Panel.
- When finished, turn off and unplug laptop, then press the Display Off button, holding it at least 2 seconds to activate shutoff.
To Use Blu-Ray on NEC TV
- Turn on Extron Control Panel (pictured above) by pressing and holding ON for 2 seconds.
- Turn on Blu-ray control panel, located inside the equipment cabinet.
- Insert Blu-Ray disc.
- Switch the input display to BLURAY by pressing and holding that button on the projector control panel for 2 seconds.
- Use NEC/Blu-Ray remote control to adjust settings for Blu-Ray player and NEC TV.
- When finished, turn off Blu-Ray player. Turn off projector by pressing and holding OFF for two seconds
More Information
For immediate assistance with classroom presentation technology (M-F 8am-5pm), please call 1-740-427-5711 or, to set up a consultation or other classroom technology service request, place a classroom technology request on our TopDesk service portal.