To use the local computer with Center Samsung TV
- Press the red Power button on the Samsung TV remote control (which is labeled "Eaton Lab.") (pictured above)
- Press the "Source" button on the remote control and select "HDMI1"
- Log into the computer (It is the first computer on your left, as you enter the room) using your Kenyon network credentials.
- Adjust audio levels using the "local PC" knob on the rack mixer.
To use Apple TV to project your Apple Device onto the Samsung TV
- Press the red Power button on the Samsung TV remote control (which is labeled "Eaton Lab.")
- Press the "Source" button on the remote control and select "HDMI 2"
- Your laptop or device must be connected to the "Kenyon Devices" wifi network in order to communicate with the Apple TV.
- Once your laptop or device is connected to "Kenyon Devices", select the AirPlay icon at the top of your device screen (it looks like a rectangle with a black triangle) and then select "Eaton lab Apple TV." (For iOs devices, swipe up from the bottom of your screen to access the Control Center, and select the AirPlay icon.)
- If you have a Windows laptop, you will need the "Air Parrot" software installed to communicate with the Apple TV. Contact Helpline for assistance.
- (Instructions for connecting to the Apple TV should also appear on the TV screen once you select "HDMI 2" on the remote control.)
- Your device's image should now appear on the TV.
- When finished, click the AirPlay icon again to disconnect.
To watch Time Warner cable TV on corner Television
- Locate the remote control labeled "Spectrum." (pictured above.)
- Press the "System On/Off" button on the upper left of the remote. Both the TV and the cable box should turn on.
- Switch channels using the Channel up and down buttons on the remote control.
- (CNN is channel 28, the weather radar is channel 26.)
- Adjust volume with the volume buttons on the Spectrum remote control.