Home »
Storer 012 Music Lab
To Use Desktop Computer with LCD Projector
- Turn on computer and log in. There is a wireless keyboard/trackpad available for control from any location in the room. (There is also a wired keyboard available.)
- On the control panel, Press the Display On button.
- Press PC button.
- Computer image should appear on screen.
- Adjust volume, if needed, with volume knob and volume icon on the computer's taskbar.
- If you need to temporarily darken the screen, press the PIC MUTE button.
- When finished, log off the computer, then press the Display Off button.
To Use Laptop with Projector
- There are two locations where one can plug in a laptop. There is a laptop cable in the cabinet under the computer and there is also one at the front of the room, near the desk.
- Plug laptop cable into laptop's external monitor jack, and connect the audio cable to the headphones jack on your laptop.
- Turn on laptop.
- To display laptop image on projector, use the Control Panel at the rear cabinet, next to monitor. (Pictured above)
- Press Display On button.
- Press Portable PC 1 or 2 button.
- Laptop image should appear on screen.
- Adjust volume with knob on Control Panel.
- When finished, turn off and unplug laptop, then press the Display Off button.
To Show a DVD or Blu-Ray disc
- The Blu-Ray DVD player is located in the cabinet below the computer monitor. It can play either standard or Blu-ray discs.
- Press the eject button on the front of the Blu-Ray player and put your disc in.
- To display the DVD image on the projector, use the Control Panel on top of cabinet, next to computer monitor. (Pictured above)
- Press the Display On button.
- Push the "Blu Ray" button on the control panel input selector.
- Use the control panel controls to navigate the DVD menu and to play the DVD. A remote control is also provided.
- Adjust the volume using the volume buttons on the control panel.
- When finished, press the "Display Off" button.
- Eject the DVD.
To Use the Document Camera
- To display a document under the Samsung Document Digital presenter document camera, use the Extron Control Panel on top of instructor station (pictured above).
- Press and hold ON for two seconds. Button will blink, indicating that the projector is slowly turning on.
- Press the DOC CAM button on the Control Panel input selector.
- Use the controls on the Samsung document camera to adjust the focus, position, and lighting of document.
- When finished, press the Display OFF button, holding it at least 2 seconds until it starts blinking. Turn off the document camera.
More Information
For immediate assistance with classroom presentation technology (M-F 8am-5pm), please call 1-740-427-5711 or, to set up a consultation or other classroom technology service request, place a classroom technology request on our TopDesk service portal.