To Turn on Leach AV System
- You may use the equipment in this room at your discretion, however, if you need assistance with an upcoming event, you may request support from LBIS by contacting Helpline at (740) 427-5700 or Helpline@kenyon.edu.
- Locate the touch panel controller, which is located on the wall to the right of the entry door. As you approach, this screen will appear:
- Press the blue icon to turn the SYSTEM POWER ON
- The projector will turn on and the screen will lower.
- You have the choice of using the laptop input, use the BluRay DVD player, or use the Apple TV. Select the desired input source at this screen:
To Use a Laptop with Projector
- Press the Laptop icon on the touch panel.
- Plug the VGA cable (located to the left of the screen) into your laptop's external monitor port. If audio is needed, plug the audio cable into the headphones output of the laptop.
- Turn on laptop.
- Laptop image should appear on screen. Note: You may have to adjust laptop settings to get image to project on screen. Call HelpLine at (740) 427-5700 or contact at Helpline@kenyon.edu if help is needed.
- Adjust volume, if desired on Control Panel.
- When finished, press System Off on the touch panel. Projector will turn off and screen will retract. Turn off laptop and unplug. Please coil the cable on the provided hook.
To Show A BluRay or standard DVD
- Press the BluRay icon on the touch panel.
- Turn on DVD player located on the right side of the wooden credenza.
- Insert DVD into the player.
- Operate DVD/CD player using buttons on touch panel controls (pictured below).
- Adjust volume on touch panel using Volume Up and Down buttons
- When finished, press System Off on the touch panel. Projector will turn off and screen will retract.
- Eject the DVD from the player.
To use the Apple TV
- Press the Apple TV icon on the touch panel.
- Apple TV interface will appear on screen.
- To stream content of your Mac Laptop, connect the laptop to the Kenyon Devices wireless network.
- Next, select the AirPlay icon on your laptop menu bar, and select Leach Apple TV.
- Adjust volume on touch panel using Volume Up and Down buttons
- When finished, press System Off on the touch panel. Projector will turn off and screen will retract.