To Use Desktop Computer with LCD Projector
- To display computer image on projector, use the Control Panel on top of instructor's lectern. (Pictured above).
- Press and hold Display On button for two seconds. The screen will lower. Button will blink, indicating that the projector is slowly turning on.
- Press MAC button on input selector of control panel.
- The computer image should appear on screen.
- Adjust volume, if needed, with volume knob on control panel.
- To temporarily mute the image, press the PIC MUTE button on the control panel.
- When finished, log off computer, then press the Display Off button, holding it at least 2 seconds until it starts blinking.
To Use Laptop with Projector
- There is a laptop cable at the instructor's lectern. Plug laptop cable into laptop's external monitor jack, and, if needed, connect the audio cable to the headphones jack on your laptop.
- Turn on laptop.
- To display laptop image on projector, use the Control Panel on top of instructor's lectern. (Pictured above)
- Press and hold Display On button for two seconds. Screen will lower. Button will blink, indicating that the projector is slowly turning on.
- Press Laptop button on control panel input selector.
- Laptop image should appear on screen. If image is not optimal, press the Auto Image button on the control panel.
- If needed, adjust volume with knob on Control Panel.
- To temporarily mute the image, press the PIC MUTE button on the control panel.
- When finished, turn off and unplug laptop, then press the Display Off button, holding it at least 2 seconds until it starts blinking. Projector will then turn off.
To Use the BluRay DVD Player
- Turn on BluRay player, located inside the equipment rack at instructor's lectern. (FYI, this unit plays both standard and BluRay DVDs and is multi-region.) Insert DVD.
- To display DVD image on projector, use Control Panel on top of instructor station. (Pictured above)
- Press and hold Display On button for two seconds. Screen will lower. Button will blink, indicating that the projector is slowly turning on.
- Press the DVD button on Control Panel input selector.
- Operate DVD player with buttons on the top control panel, or the provided remote control.
- Adjust volume using knob on Control Panel.
- When finished, press the Display OFF button, holding it at least 2 seconds until it starts blinking. Eject DVD and turn off DVD player.