ASC 114 seminar room




To Use a Laptop with the Projector
  • There are is HDMI cable on the instructor’s console.  Use the appropriate attached adapter, and plug it into your laptop.  
  • Turn on laptop.
  • To display laptop image on projector, use the Control Panel on top of instructor station. (Pictured above)  Press and hold Display On button for two seconds. Button will blink, indicating that the projector is turning on.
  • Press the HDMI button on the control panel input selector.
  • Laptop image should appear on screen. If image is not optimal, press the Auto Image button on the control panel.
  • If needed, adjust volume with knob on Control Panel.  If audio does not work, try unplugging and re-plugging the adapter into your laptop.
  • To temporarily mute the image, press the PIC MUTE button on the control panel.
  • When finished, turn off and unplug laptop, then press the Display Off button, holding it at least 2 seconds until it starts blinking. Projector will then turn off.

More Information
For immediate assistance with classroom presentation technology (M-F 8am-5pm), please call 1-740-427-5711 or, to set up a consultation or other classroom technology service request, place a classroom technology request on our TopDesk service portal.